Alternatively, contact us directly to learn about the right solution for your communication needs.
Call us on 425-882-2206 or use this contact us form.
A Quick Look at the FDM7000 Industrial Fiber Optic Modem
The Data-Linc FDM7000 Industrial Fiber Optic Modem can be used at ranges up to 2 miles. They can be configured for point-to-point with no field settings or jumpers to adjust as the FDM7000 comes pre-configured from the factory. Fiber optic cables from 50/125 to 80/125 are used with the modem. Operating temperature range is 32° to 140°F (0°C to 60°C). No baud rate settings are necessary, as the modem is transparent to baud rates from 0 to 115.2 Kbaud. The FDM7000 can be supplied with RS-232, RS-422/485 interface. LED indicators for Power, Data In and Data Out make system operation and diagnosis simple and easy.
The FDM7000 connects to communications equipment through the DB-9 connector on the Power/Data end of the modem.
| FDM7000 Pin # | PLC-5 25-PIN | SLC 500 | Assignment |
|---|---|---|---|
| 1 | NC | NC | Carrier Detect |
| 2 | 2 | 3 | Transmit Data |
| 3 | 3 | 2 | Receive Data |
| 4 | 20 | 4 | DTR |
| 5 | 7 | 5 | Sig Ground |
| 6 | 6 | 6 | Data Set Ready |
| 7 | 4 | 7 | RTS |
| 8 | 5 | 8 | Clear to Send |
| 9 | 1 | 9 | Ground |
6/18/02 For further information, please contact
Data-Linc Group
FAX: (425) 867-0865
Phone: (425) 882-2206
E-mail: te*********@da*******.comContent by Data-Linc Group
© 1998-2002 All rights reserved. 020708RM
Contact Data-Linc Group for the latest updates to Installation Guides & User Manuals.